![]() By this time, I assume you have already setup the two routers to different IP addresses on the same subnet. In the Linksys "Basic" setup menu, enter the gateway and resolver IP address of the linksys as the IP address of the B970.Note the MAC address listed atop and ensure its the same address in the B970. Go to the WDS menu, enter the MAC address of the B970 and select LAN. Ensure the SSID, channel and security settings in the Linksys match those in the B970. Open the dd-wrt Web UI, turn off the WAN interface, DHCP and firewall.Do not get the MAC address at the back of the Linksys, but in the dd-wrt WDS page. Open the B970's admin interface, go to advanced wireless settings, go to "wireless bridge", enter the MAC address of the WRT54GS.Congratulations if you have come this far, and are ready to proceed :-) If you are wary of this, then just buy the Linksys WRE54G. This is a trivial process, depending on the Linksys router you have. Instructions to do this are galore on the dd-wrt website. Grab your Linksys WRT54GS (or any Linksys wifi router with a broadcom chip). ![]() The vagaries of this step will not be covered here - refer to the packaged printed manual (in the box). It's a lil bit tricky, you need to create a profile for your operator (you must be equipped with your APN + user-name and password if required), then set this profile as the default. Setup the Huawei (aka Vodafone) B970 router, make sure it can properly serve wifi (and net connectivity).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |